Enhanced Secure Digital host controller for SD, SDHC, SDIO, MMC, and MMCplus cards
Two ISO7816 smart card interfaces
Two FlexCAN modules
Six I2C bus interfaces with DMA support in master mode
Two synchronous serial interfaces
Four 32-bit timers with DMA support
Four programmable interrupt timers
8-channel, 16-bit motor control PWM timer
Dual 12-bit ADCs with shared input channels and multiple conversion trigger sources
Dual 12-bit DACs with DMA support
1-wire module with DMA support
NAND flash controller
Real-time clock with 32-kHz oscillator, 2 KB standby SRAM, and battery backup supply input
Up to four DMA-supported serial peripheral interfaces (DSPI)
Up to ten UARTs with single-wire mode support
Up to five external IRQ interrupts and 2 external DMA request/acknowledge pairs
Up to 16 processor local bus Rapid GPIO pins
Up to 87 standard GPIO pins
Version 4 ColdFire Core with EMAC and MMU
Up to 385 Dhrystone 2.1 MIPS @ 250 MHz
8 KB instruction cache and 8 KB data cache
64 KB internal SRAM dual-ported to processor local bus and other crossbar switch masters
System boot from NOR, NAND, SPI flash, EEPROM, or FRAM
Crossbar switch technology (XBS) for concurrent access to peripherals or RAM from multiple bus masters
64-channel DMA controller
SDRAM controller supporting full-speed operation from a single x8 DDR2 component up to 250 MHz
32-bit FlexBus external memory interface for RAM, ROM, MRAM, and programmable logic
USB 2.0 host controller
USB 2.0 host/device/On-the-Go controller
8-bit single data rate ULPI port usable by the dedicated USB host module or the USB host/device/OTG module
Dual 10/100 Ethernet MACs with hardware CRC checking/generation, IEEE 1588-2002 support, and optional Ethernet switch
CPU direct-attached hardware accelerator for DES, 3DES, AES, MD5, SHA-1, and SHA-256 algorithms
Random number generator
