MKE02Z16VFM4 Description
The MKE02Z16VFM4 is a Kinetis? KE02-20 MHz, Entry-Level Microcontrollers (MCUs) based on Arm? Cortex?-M0+ Core. A microcontroller is a tiny computer on a single VLSI integrated circuit (IC) chip, often known as an MCU (microcontroller unit). One or more CPUs (processor cores), memory, and programmable input/output peripherals are all included in a microcontroller. Along with a tiny amount of RAM, on-chip program memory frequently also includes ferroelectric RAM, NOR flash, or OTP ROM. In contrast to the microprocessors used in personal computers or other general-purpose applications made up of numerous discrete chips, microcontrollers are intended for embedded applications.
MKE02Z16VFM4 Features
– One 6-channel FlexTimer/PWM (FTM)
– Two 2-channel FlexTimer/PWM (FTM)
– One 2-channel periodic interrupt timer (PIT)
– One real-time clock (RTC)
– Two SPI modules (SPI)
– Up to three UART modules (UART)
– One I2C module (I2C)
– 64-pin QFP/LQFP
– 44-pin LQFP
– 32-pin LQFP
– 32-pin QFN
– Power management module (PMC) with three power modes: Run, Wait, Stop
– Low-voltage detection (LVD) with reset or interrupt, selectable trip points
– Watchdog with independent clock source (WDOG)
– Programmable cyclic redundancy check module (CRC)
– Serial wire debug interface (SWD)
– Bit manipulation engine (BME)
– 64-bit unique identification (ID) number per chip
? Human-machine interface
– Up to 57 general-purpose input/output (GPIO)
– Two up to 8-bit keyboard interrupt modules (KBI)
– External interrupt (IRQ)
– One up to 16-channel 12-bit SAR ADC, operation in Stop mode, optional hardware trigger (ADC)
– Two analog comparators containing a 6-bit DAC and programmable reference input (ACMP)
– Voltage range: 2.7 to 5.5 V
– Flash write voltage range: 2.7 to 5.5 V
– Temperature range (ambient): -40 to 105°C
– Up to 40 MHz Arm? Cortex-M0+ core and up to 20 MHz bus clock
– Single cycle 32-bit x 32-bit multiplier
– Single cycle I/O access port
– Up to 64 KB flash
– Up to 256 B EEPROM
– Up to 4 KB RAM
– Oscillator (OSC) - supports 32.768 kHz crystal or 4 MHz to 20 MHz crystal or ceramic resonator; choice of low power or high gain oscillators
– Internal clock source (ICS) - internal FLL with internal or external reference, 31.25 kHz pretrimmed internal reference for 32 MHz system clock (able to be trimmed for up to 40 MHz system clock)
– Internal 1 kHz low-power oscillator (LPO)
MKE02Z16VFM4 Applications
Light sensing & controlling devices
Temperature sensing and controlling devices
Fire detection & safety devices
Industrial instrumentation devices
Process control devices