TDA7052/N2,112 Overview

There is a device embedded in 8-DIP (0.300, 7.62mm) .Amp parts is recommended that the chip be packaged in a Tube case.Amp parts is possible to terminate a transmission line wAmp partsh a device matching Amp partss characteristic impedance, referred to as a 8 termination.1-Channel (Mono) is the output configured for it.The device is of type Class AB .Electronic parts are mounted in the way of Through Hole .Amp parts is powered by a voltage of 3V~18V volts.1 channels are present on the device.Operation can be ensured by Depop, Short-Circuit Protection .There are 8 pins present on this device.This is a member of the TDA7052 family.To ensure normal operation, the supply voltage (Vsup) must be maintained above 3V .The maximum supply voltage (Vsup) is reached at 18V .The device is powered by a voltage of 6V volts.A maximum supply current of 8mA is achieved.Amp parts is recommended that the operating temperature be at least -40°C .Amp parts is recommended that the operating temperature do not exceed 85°C °C.

TDA7052/N2,112 Features

8-DIP (0.300, 7.62mm) package
8 pin count
TDA7052 family

TDA7052/N2,112 Applications

There are a lot of NXP USA Inc.
TDA7052/N2,112 audio amplifiers applications.

• Precision measurement
• Power control
• Information processing
• Weak signal detection
• Signal amplification
• Signal filtering
• Signal operation
• Video and image computer boards
• Medical instruments
• Television broadcasting equipment