TDA8920BJ/N2,112 Overview

In the 23-SIP Formed Leads package, it is embedded.In this case, it is packaged as Tube .In addition, there are 23 terminations, which involve the termination of a transmission line with a device that matches the characteristic impedance of the line.In the configuration, 1-Channel (Mono) or 2-Channel (Stereo) is used as the output.This electrical device is classified as type Class D .In this case, the electronic part is mounted in the way of Through Hole .There is ±12.5V~30V voltage supply to this electrical device.2 channels are available on the device.Operating with Depop, Differential Inputs, Mute, Short-Circuit and Thermal Protection, Standby is possible.Temperatures should not exceed -40°C~85°C TA .There are 23 pins on this device.Amp parts belongs to the TDA8920 family.A normal operation requires a supply voltage (Vsup) above 12.5V .In this case, the maximum supply voltage (Vsup) reaches 30V .Power is supplied by a 12.5/30V volt source.Supply currents are limited to 65mA .

TDA8920BJ/N2,112 Features

23-SIP Formed Leads package
23 pin count
TDA8920 family

TDA8920BJ/N2,112 Applications

There are a lot of NXP USA Inc.
TDA8920BJ/N2,112 audio amplifiers applications.

• single/dual op amp sum and difference circuits
• Integrator and differentiator circuits
• Logarithmic and exponential operation circuits
• Multiplication and division circuits
• Precision measurement
• Power control
• Information processing
• Weak signal detection
• Signal amplification
• Signal filtering