E2B-S08LN04-MC-B2 Overview

This is included in the Cylinder, Threaded - M8 package to make it easier for you to use. With an operating temperature of -25°C~70°C, proximity sensors can work efficiently. A 3 pin electronic component is used in this application. The supply voltage of proximity sensors should be set to 30V for maximum efficiency. To ensure that proximity sensors work properly, the rate should be set to 1kHz. To work well, the reed switch's internal contacts should pass 200mA current. There is a maximum voltage of 30V that can be applied to proximity sensors in DC circuits without causing damage. In a DC circuit, the proximity sensors must have a current higher than 10V. To maximize efficiency, set this electronic part's current to 200mA. If the proximity sensor is to function properly, the frequency should be 1kHz.

E2B-S08LN04-MC-B2 Features

E2B Series
Operating Temperature: -25°C~70°C
Sensing Distance: 0.157 (4mm)
Voltage - Supply: 10V~30V
Package / Case: Cylinder, Threaded - M8
Moisture Sensitivity Level (MSL): 1 (Unlimited)
Operating Supply Current: 200mA

E2B-S08LN04-MC-B2 Applications

There are a lot of Omron Automation and Safety E2B-S08LN04-MC-B2 Proximity Sensors applications.

• Assembly lines
• TV
• Contact less switching
• Display products
• Usage in Security
• Office automation equipment
• Count different applications
• Rolling mills
• Measurement of the distance from the target
• Rice cookers