E2B-S08LN04-MC-C1 Overview

This is included with the Cylinder, Threaded - M8 package for your convenience. It is possible to operate proximity sensors successfully at a temperature of -25°C~70°C. There are 3 pins on this electronic component. If you want to get the most out of proximity sensors, you should set the supply voltage to 30V. Ensure that the proximity sensor switch performs its function by setting the rate to 1kHz. ldeally, the reed switch's internal contacts should pass 200mA to make the proximity sensors work properly. It is possible to apply a voltage of 30V to proximity sensors without causing damage to them in DC circuits. There should be no current flowing through the proximity sensors in the DC circuit below 10V, otherwise it could prove hazardous. Setting this electronic part's current to 200mA will maximize efficiency. In order for the proximity sensor to work, it should have a frequency of 1kHz.

E2B-S08LN04-MC-C1 Features

E2B Series
Operating Temperature: -25°C~70°C
Sensing Distance: 0.157 (4mm)
Voltage - Supply: 10V~30V
Package / Case: Cylinder, Threaded - M8
Moisture Sensitivity Level (MSL): 1 (Unlimited)
Operating Supply Current: 200mA

E2B-S08LN04-MC-C1 Applications

There are a lot of Omron Automation and Safety E2B-S08LN04-MC-C1 Proximity Sensors applications.

• Assembly lines
• Non-ferrous objects detection
• Self-driving cars
• Measurement of the distance from the target
• TV
• Office automation equipment
• Counter System
• Smart toilets
• Lighting
• Usage in Security