E2B-S08LS02-MC-B2 Overview
It's included in Cylinder, Threaded - M8 so you can find it easily. It is possible to use the proximity sensors at -25°C~70°C. The pins on this electronic component are 3. A proximity sensor's supply voltage should be set to 30V for maximum efficiency. Despite their low operating temperature -25°C, proximity sensors are still able to function. In order to operate, proximity sensors must have an operating temperature below 70°C. It is important that the rate of the proximity sensor be set at 1.5kHz so that the proximity sensor switch can function properly. Reed switches are designed to use reed switches with internal contacts that pass 200mA current. DC circuits can withstand the maximum voltage of 30V without damaging proximity sensors. If the proximity sensors are in a DC circuit, their current shouldn't be lower than 10V, otherwise, there can be a problem. To maximize efficiency, set this electronic part's current to 200mA. In order for the proximity sensor to work, it should have a frequency of 1.5kHz.
E2B-S08LS02-MC-B2 Features
E2B Series
Operating Temperature: -25°C~70°C
Sensing Distance: 0.079 (2mm)
Voltage - Supply: 10V~30V
Response Frequency: 1.5kHz
Package / Case: Cylinder, Threaded - M8
Moisture Sensitivity Level (MSL): 1 (Unlimited)
Operating Supply Current: 200mA
E2B-S08LS02-MC-B2 Applications
There are a lot of Omron Automation and Safety
E2B-S08LS02-MC-B2 Proximity Sensors applications.
- Display products
-
- Air-conditioners
-
- TV
-
- PC monitors
-
- Rice cookers
-
- Smart toilets
-
- Recycling plants
-
- Self-driving cars
-
- Anti-aircraft systems
-
- Assembly lines
-
