E2B-S08LS02-MC-C1 Overview

We have included it as part of the Cylinder, Threaded - M8 package for your convenience. At temperatures of -25°C~70°C, proximity sensors work well. Pins 3 on this electronic component. In order to maximize the efficiency of proximity sensors, it is recommended that the supply voltage be set to 30V. In order to ensure the proximity sensors work correctly, the rate must be set to 1.5kHz. ldeally, the reed switch's internal contacts should pass 200mA to make the proximity sensors work properly. As long as the proximity sensors are not damaged, the maximum voltage of 30V can be applied to them. There should be no current flowing through the proximity sensors in the DC circuit below 10V, otherwise it could prove hazardous. In order to maximize efficiency, you should set this electronic part's current to 200mA. If you want the proximity sensor to work, it should have a frequency of 1.5kHz.

E2B-S08LS02-MC-C1 Features

E2B Series
Operating Temperature: -25°C~70°C
Sensing Distance: 0.079 (2mm)
Voltage - Supply: 10V~30V
Package / Case: Cylinder, Threaded - M8
Moisture Sensitivity Level (MSL): 1 (Unlimited)
Operating Supply Current: 200mA

E2B-S08LS02-MC-C1 Applications

There are a lot of Omron Automation and Safety E2B-S08LS02-MC-C1 Proximity Sensors applications.

• Office automation equipment
• Anti-aircraft systems
• PC monitors
• Plastic object detection
• Notebooks
• Automatic faucet
• Wearables
• Air-conditioners
• Tablets
• Rolling mills