100331QC Overview

As a result, it is packaged as 28-LCC (J-Lead). You can find it in the Tubepackage. Differentialis the output configured for it. JK flip flop uses Positive Edgeas the trigger. In this case, the electronic component is mounted in the way of Surface Mount. With a supply voltage of -4.2V~-5.7V volts, it operates. It is at 0°C~85°C TCdegrees Celsius that the system is operating. This D latch has the type D-Type. It should not exceed 400MHzin terms of its output frequency. It has been determined that there have been 28 terminations. JK flip flop belongs to 100331 family. There is an electronic component mounted in the way of Surface Mount. The 28pins are designed into the board. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. Its flexibility is enhanced by 3 circuits. There are 5 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. In addition, WITH ADDITIONAL COMMON CLOCK; SET AND RESET INPUTSis a characteristic of it. 50mAis the output current at high level. 50mA is the low level output current.

100331QC Features

Tube package
28 pins

100331QC Applications

There are a lot of ON Semiconductor 100331QC Flip Flops applications.

• Digital electronics systems
• Buffered Clock
• Set-reset capability
• Memory
• ESCC
• Asynchronous counter
• Cold spare funcion
• Differential Individual
• Computing
• Storage Registers