2N5060RLRA Overview

SCRs are rated at 0.51 rated average on-state current (A), which is the maximum repetitive average forward current that can flow through them.Keeping the RMS on-state current under 0.8 A is important for normal operation of the device.This device has a repetitive peak off-state voltage of 30 V, which is its maximum peak voltage across the device.Holding current (hypostatic) for electrical, electromagnetic, and electronic devices is the minimum current passing through a circuit in order for it to remain in an "ON" state.Normal operation requires a peak voltage (V) of [email protected] device's DC gate trigger current-Max is 0.2 mA, which is what is required to switch the device from the blocked (Off) state to the unblocked (On) state.An SCR's surge current rating is 10, which specifies the maximum amount of non-repetitive current it can withstand during its life span.In this case, the repetitive peak reverse voltage is the maximum instantaneous value of the reverse voltage, including all repetitive transient voltages.

2N5060RLRA Features

the rated average on-state current is 0.51
the repetitive peak off-state voltage of this device is 30 V
its current can be 5 mA
the peak on-state voltage (V) should be [email protected]

2N5060RLRA Applications

There are a lot of ON Semiconductor
2N5060RLRA applications of SCRs thyristors.

• DC motor control and drives
• Battery charges
• Welders
• Power converters
• Lighting control
• Heat and temperature control
• Motor starters
• DC motor controls - AC motor controls
• Uninterruptable power supplies
• Wind mill