74ACT563SC Overview

A package called 20-SOIC (0.295, 7.50mm Width) contains it. This package has the format of Tube. The output it is configured with uses Tri-State. The Logic type of this electrical device is D-Type Transparent Latch. According to Surface Mount, this electronic part is mounted. A voltage of 4.5V~5.5V is used as the supply voltage for this device. A temperature of -40°C~85°C is set as the operating temperature. An FPGA in this series belongs to the 74ACT family. There are 8 bits in this electronic part. 74ACT563 is the family name of it. This board has 20 pins on it, which is what it is designed for. Electronic parts are mounted using the Surface Mount method. It contains 8 input lines where electronic circuits are present. For maximum efficiency, the supply voltage should be set to 5V. A binary equivalent of the input line is generated by the 3 output lines. 1 elements are present in it. To achieve its exceptional flexibility, it relies on 8 circuits. 24mA is set as the low level output current. -24mA represents the high level output current. A temperature below 85°C should be used for operation. There should be a temperature above -40°C at which the device operates. The supply voltage is limited to 5.5V. A voltage of 4.5V is the minimum supply voltage required for it to operate.

74ACT563SC Features

20-SOIC (0.295, 7.50mm Width) package
74ACT series
8 Bits
74ACT563 family
20 pins
1 elements

74ACT563SC Applications

There are a lot of ON Semiconductor 74ACT563SC Latches applications.

• Parallel data storage
• Shift right with parallel loading
• Counter
• Parallel Output
• Relay
• BCD counting
• Display driver
• Automotive Body Electronics
• Four-bit storage with output enable
• Synchronous frequency dividers