74ACT563SCX Overview

The package in which it is embedded is named 20-SOIC (0.295, 7.50mm Width). Tape & Reel (TR) is the way in which it is packaged. It uses Tri-State as its output configuration. The Logic type of this electrical device is D-Type Transparent Latch. Surface Mount is used to mount this electronic part. The voltage supply is 4.5V~5.5V. It is -40°C~85°C at the operating temperature. The 74ACT series is associated with this FPGA. An electronic part with 8 bits is designed. This type belongs to the 74ACT563 family. This board has 20 pins on it, which is what it is designed for. This electronic part is mounted in the way of Surface Mount. There are 8 input lines in which electronic circuits are present. In order to achieve high efficiency, the supply voltage should be kept at 5V. A binary equivalent of the input line is generated by the 3 output lines. A total of 1 elements make up this object. 8 circuits enable it to achieve high performance. The low level output current is set to 24mA. It is set to zero for the high level output current. The operating temperature should be lower than 85°C. It is recommended that the operating temperature be higher than -40°C. It supports a maximum supply voltage of 5.5V. There is a minimum supply voltage of 4.5V for it.

74ACT563SCX Features

20-SOIC (0.295, 7.50mm Width) package
74ACT series
8 Bits
74ACT563 family
20 pins
1 elements

74ACT563SCX Applications

There are a lot of ON Semiconductor 74ACT563SCX Latches applications.

• Shift left register
• Hammer
• Automotive Infotainment
• Parallel data synchronization
• Counter control
• Up/down difference counting
• Automotive HEV/EV Powertrain
• High-speed logic
• Frequency dividing
• Hammer Device Information