74ACT74SJ Overview

14-SOIC (0.209, 5.30mm Width)is the packaging method. You can find it in the Tubepackage. T flip flop uses Differentialas the output. The trigger configured with it uses Positive Edge. This electronic part is mounted in the way of Surface Mount. A voltage of 4.5V~5.5Vis used as the supply voltage. Currently, the operating temperature is -40°C~85°C TA. The type of this D latch is D-Type. This type of FPGA is a part of the 74ACT series. This D flip flop should not have a frequency greater than 210MHz. There are 2 elements in it. There is 20μA quiescent consumption. JK flip flop belongs to 74ACT74 family. There is 4.5pF input capacitance for this T flip flop. There is an electronic part that is mounted in the way of Surface Mount. As you can see from the design, it has pins with 14. This device exhibits a clock edge trigger type of Positive Edge. This flip flop is designed with 2 Bits. The superior flexibility of this product is achieved by using 2 circuits. It is recommended that the supply voltage be kept at 5Vto maximize efficiency. The JK flip flop is with 1 output lines to operate. 1input lines are available for you to choose from. A -24mAis set for the high level output current. It is set to 24mAfor the low level output current. It is recommended that the operating temperature be lower than 85°C. A temperature above -40°Cshould be used for the operation. It operates with the minimal supply voltage of 4.5V. It is capable of supporting a maximum supply voltage of 5.5V. We are able to achieve a frequency of 210MHz.

74ACT74SJ Features

Tube package
74ACT series
14 pins
2 Bits

74ACT74SJ Applications

There are a lot of ON Semiconductor 74ACT74SJ Flip Flops applications.

• Digital electronics systems
• ESD protection
• Computing
• Shift registers
• Balanced Propagation Delays
• Cold spare funcion
• Convert a momentary switch to a toggle switch
• Frequency Divider circuits
• Asynchronous counter
• Matched Rise and Fall