74ACTQ373SJ Overview

The 20-SOIC (0.209, 5.30mm Width) package contains it. A package of Tube has been used. It uses Tri-State as its output configuration. There is a logic type of D-Type Transparent Latch associated with this electrical device. Electronic parts are mounted in accordance with Surface Mount. In order for it to operate, it needs a supply voltage of 4.5V~5.5V. During operation, the temperature is set at -40°C~85°C. In the 74ACTQ series, this FPGA is located. 8 Bits are used in the design of this electronic part. This type belongs to the 74ACTQ373 family. Designed with 20 pins, it is compatible with a wide range of devices. A Surface Mount mounting method has been used for this electronic part. It contains 8 input lines where electronic circuits are present. High efficiency requires a voltage supply of 5V. There are 3 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. 1 elements are present in it. The circuit's superior flexibility is achieved through the use of 8 circuits. In the low level output current, the value is set to 24mA. It is set to zero for the high level output current. Lower than 85°C is the recommended operating temperature. Temperatures above -40°C should be used. 5.5V is the maximum voltage it supports. The minimal voltage for operation is 4.5V.

74ACTQ373SJ Features

20-SOIC (0.209, 5.30mm Width) package
74ACTQ series
8 Bits
74ACTQ373 family
20 pins
1 elements

74ACTQ373SJ Applications

There are a lot of ON Semiconductor 74ACTQ373SJ Latches applications.

• Shift left with parallel loading
• Relay replacement
• Counter control
• Synchronous frequency dividers
• Parallel Output
• Clocks
• Display driver
• Parallel data storage
• Multistage ripple counting
• Serial Output Register