74LCX374BQX Overview

20-WFQFN Exposed Padis the way it is packaged. The package Tape & Reel (TR)contains it. In the configuration, Tri-State, Non-Invertedis used as the output. The trigger it is configured with uses Positive Edge. Surface Mountmounts this electrical part. Powered by a 2V~3.6Vvolt supply, it operates as follows. Temperature is set to -40°C~85°C TA. This electronic flip flop is of type D-Type. The FPGA belongs to the 74LCX series. It should not exceed 150MHzin its output frequency. In total, there are 1 elements. A total of 20 terminations have been made. The object belongs to the 74LCX374 family. The power source is powered by 2.5V. This T flip flop has a capacitance of 7pF farads at the input. Devices in the LVC/LCX/Zfamily are electronic devices. It is mounted in the way of Surface Mount. 20pins are included in its design. In this device, the clock edge trigger type is Positive Edge. This device is part of the FF/Latchesbase part number family. It is designed with a number of bits of 8. There is a 3.6Vmaximum supply voltage (Vsup). The supply voltage (Vsup) should be kept above 2V for normal operation. This D flip flop is well suited for TAPE AND REEL based on its reliable performance. A total of 3.3V power supplies are needed to run it. This D flip flop is equipped with 0 ports. It is reported that there are 8 input lines. This D latch consumes 10μA quiescent current at all.

74LCX374BQX Features

Tape & Reel (TR) package
74LCX series
20 pins
8 Bits
3.3V power supplies

74LCX374BQX Applications

There are a lot of ON Semiconductor 74LCX374BQX Flip Flops applications.

• Asynchronous counter
• Modulo – n – counter
• Single Down Count-Control Line
• Digital electronics systems
• Guaranteed simultaneous switching noise level
• Registers
• Storage Registers
• 2 – Bit synchronous counter
• Convert a momentary switch to a toggle switch
• Balanced 24 mA output drivers