74LCX841MSAX Overview

A package called 24-SSOP (0.209, 5.30mm Width) contains it. A package of Tape & Reel (TR) has been used. In its configuration, Tri-State is used as the output. In this electrical device, the logic type is D-Type Transparent Latch. Electronic parts are mounted in accordance with Surface Mount. It operates at a voltage of 2V~3.6V. There is -40°C~85°C operating temperature. There are a number of FPGAs in this series, including this one. It is designed with 10 bits. The family in which it belongs to is 74LCX841. 24 pins are used in its design. The electronic part is mounted using the Surface Mount method. There are 2 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. 3 output lines provide binary equivalents of input lines. This element consists of 1. 1 circuits enable it to achieve high performance. 24mA represents the low level output current. -24mA is set as the high level output current. Lower than 85°C is the recommended operating temperature. Temperatures higher than -40°C should be used for operation. The maximum supply voltage is 3.6V. With a voltage of 2V, it operates at its minimum capacity.

74LCX841MSAX Features

24-SSOP (0.209, 5.30mm Width) package
74LCX series
10 Bits
74LCX841 family
24 pins
1 elements

74LCX841MSAX Applications

There are a lot of ON Semiconductor 74LCX841MSAX Latches applications.

• Relay
• Flip-flops
• Parallel Output
• Timers
• Hammer Device Information
• Decade counting 7-segment decimal display
• Storage
• Counting
• Hammer
• Buffer/Storage Registers