74LVTH16245MTD Overview

Logical driver uses a neat 48-TFSOP (0.240, 6.10mm Width) package. Tube external packaging. Available in Surface Mount. Voltage buffer adopts Buffer, Non-Inverting logic prototype. Buffer IC is fed with a voltage of 2.7V~3.6V. Qualified to operate within -40°C~85°C TA. The high and low logic state output current of logical driver is 32mA 64mA. Logical driver can deal with 3-State output (s). All of the 2 elements are put into use. Digital buffer is one of the 74LVTH series devices. Buffer IC is suitable for Surface Mount applications. Logical driver has 48 pins. The bus transceiver employs 8 bits for each element. You can search "74LVTH16245" for other related electrical components. To run the part safely and stably in a circuit, 3.3V recommends users apply 3.3V on the logical driver. 16 bits are included within the electrical component. 16 channels for high quality communication. Voltage buffer is capable of operating under temperature as low as -40°C. Digital buffer should operate with ambient temperature no higher than 85°C. Buffer driver outputs 64mA to its low level. In high level output mode, the electronic parts may conduct -32mA of current. Voltage used to run voltage buffer should be 2.7V at least. In regard to the maximum supply voltage, buffer driver is rated 3.6V. Supplier device package of this electronic part would be 48-TSSOP. The fundamental operation of logical driver is based on 2 circuits. The typical output current of the logical driver is measured 64mA.

74LVTH16245MTD Features

High Level Output: 64mA
Low Level Output: -32mA

74LVTH16245MTD Applications

There are a lot of ON Semiconductor 74LVTH16245MTD Buffers & Transceivers applications.

• Wireless 3D game
• Military satellite communications
• Remote controls
• Single to Multimode Fiber Conversion
• Digital systems
• Point-to-point networking
• 1x/2x Fiber Channel
• Clock radio
• Sensor reporting
• Optical sub-assembly (OSA)