74VHCT573AMTCX Overview

It is embedded in the 20-TSSOP (0.173, 4.40mm Width) package. Tape & Reel (TR) is the way it is packaged. Tri-State is used for the output it is configured with. In this electrical device, the logic type is D-Type Transparent Latch. This electronic part is mounted in the way of Surface Mount. With a supply voltage of 4.5V~5.5V, it operates. It is -40°C~85°C at the operating temperature. There are a number of FPGAs in this series, including this one. With this electronic part, there are 8 bits. A device with this design has 20 terminations. 74VHCT573 is its family. In order to operate it, the supply voltage must be 5V. This electronic device belongs to the family of AHCT/VHCT. There are 20 pins on it. Electronic parts are mounted using the Surface Mount method. This device has 2 ports that can be connected to it. Subcategory FF/Latches includes this part. A total of 5V power supplies are needed to run it. It consists of 2 input lines from which an electronic circuit can be built. On the basis of its reliability, this device is well suited for TAPE AND REEL. A high efficiency supply voltage should be maintained at 5V. As far as external factors are concerned, it consumes 4μA of quiescent current without getting affected by them. Additionally, it is characterized by BROADSIDE VERSION OF 373.

74VHCT573AMTCX Features

20-TSSOP (0.173, 4.40mm Width) package
74VHCT series
8 Bits
74VHCT573 family
20 pins
5V power supplies

74VHCT573AMTCX Applications

There are a lot of ON Semiconductor 74VHCT573AMTCX Latches applications.

• Clocks
• A/D and D/A conversion
• Parallel data synchronization
• Accumulator Registers
• Shift right register
• Motor Drives
• Counter
• Automotive ADAS
• Shift Registers
• Bus system register with enable parallel lines at bus side