7SB384DFT2G Overview

Providing this information in the 5-TSSOP, SC-70-5, SOT-353 enables digital switch board space to be saved.Tape & Reel (TR) is the method used for packaging.The method digital switch ic adopts for mounting is Surface Mount.For the analog part of the multiplexers, an IC Bus Switch is used.In the case of -55°C~125°C, turn signal switch will not be affected by external factors.When operated with a 4V~5.5V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.Among its basic configurations are 5 terminations.The base part number is 7SB384, which is also useful when looking up signal switch's related components.The multiplexer's system is powered by 4.5V voltage.A component pin count of 5 is found on this turn signal switch.As a result, GULL WING represents the end of the conductors.There is a type of supply of Single.It is configured with 5 pins.Signal multiplexer contains 1 bits.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 4V.Bus Driver/Transceiver is a category for the digital switch ics.Without external influences, it consumes 100nA current of multiplexer ic.With a supply voltage of 5V, reliable performance of the multiplexers can be achieved.A resistance of 2 is used to operate the signal switching.This signal switching operates at a resistance of 20Ohm.There are 1 elements used for the mux switch configuration.

7SB384DFT2G Features

Supplied in the 5-TSSOP, SC-70-5, SOT-353 package
Adopting a supply type of Single
Operating with the supply voltage of 5V

7SB384DFT2G Applications

There are a lot of ON Semiconductor 7SB384DFT2G Signal Switches / Multiplexers / Decoders applications.

• Enabling block of memory depending on address in memory chips
• A robotic vehicle with the metal detector
• Night vision cameras
• GLAN
• Transmission from the computer system of a satellite
• Arithmetic Logic Units
• Analog to digital conversion
• Video transmission
• Relay
• A/D converters