CAT1022LI-45-G Overview

As you can see, this power management is mounted through 8 terminals. Packaging is in the form of a Tube. The purpose of this IC management is to provide you with a reference of 1 functions. A series of 1 channels can be found on this supervisor. IC management is packaged as a 8-DIP (0.300, 7.62mm) package. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. In order to ensure a good reflow performance, the package peak reflow temperature must be set at NOT SPECIFIED. When a supply voltage of 3.3V is applied to the power ic, it conducts. When a supply voltage of 1 is applied to the power ic, it conducts. Power management is included in the Through Hole mount. In total, IC powers are 8 pins on the board. This power management has 8 pins. Supply voltage (Vsup) should be at least 2.7V for this power management. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. The mounting type of the supervisors is Through HoleThis range of temperature should be set for the supervisors: -40°C~85°C TA. During operation, this power management system outputs Open Drain or Open Collector. As far as the supply current of the power management is concerned, it is 3mA. There are other features such as RESET THRESHOLD VOLTAGE IS 4.625V; MANUAL RESET INPUT to name a few. A similar IC managements number of the manufacturer can always be found by using CAT1022, the base power ics number. At the most, voltage supervisor can work with a supply temperature of 3mA.

CAT1022LI-45-G Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 2.7V
3mA operating supply current

CAT1022LI-45-G Applications

There are a lot of ON Semiconductor CAT1022LI-45-G Voltage Supervisors applications.

• Data storage applications
• Urban rail transit weak current power monitoring
• Power communication system
• Military electronics
• Efficient information transmission
• Radio
• Low voltage/high power - AI, GPU
• Medical-specific insulation monitor
• Power distribution systems of ICU
• Kitchen appliances