CAT1023LI-30-G Overview

A total of 8 terminals are used to mount this power management. Packaging is in the form of a Tube. In this PMIC, you can find 1 functions for your reference. On this supervisor, there is a series of 1 channels that can be found. To assist you, this PMIC includes 8-DIP (0.300, 7.62mm) functions. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of NOT SPECIFIED for the package during reflow. The supervisor is always powered by a 3.3V volt supply. When a supply voltage of 1 is applied to the power ic, it conducts. Using Through Hole, IC management is mounted. The total number of pins on this power management is 8. 8 pins make up the power management. It is recommended that Vsup should not be less than 2.7V for this IC power. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The recommended mounting type for IC management is Through Hole. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. The supply current of the power management is 3mA. Additionally, IC management are a variety of features, for example [0], to name a few. A similar IC managements number of the manufacturer can always be found by using CAT1023, the base power ics number. The maximum supply temperature is 3mA.

CAT1023LI-30-G Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 2.7V
3mA operating supply current

CAT1023LI-30-G Applications

There are a lot of ON Semiconductor CAT1023LI-30-G Voltage Supervisors applications.

• Radio
• Automotive power systems
• DVR
• Battery cars
• Personal computers
• Utility meter
• Medical-specific insulation monitor
• Power distribution systems of infant care room
• Battery-powered equipment
• Satellite navigation