CAT1023YI-25-GT3 Overview

There are 8 terminals connected to this power management, which makes it easy to mount. Tape & Reel (TR)-packaging is used. For your reference, this IC power includes a list of 1 functions. A series of 1 channels can be found on this supervisor. As a reference, this IC power includes 8-TSSOP (0.173, 4.40mm Width) functions for your convenience. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. According to the specification, the package's peak reflow temperature is specified to be NOT SPECIFIED. The supervisor is always powered by a 3.3V volt supply. A supply voltage of 1 is used to conduct the PMIC chip. The mount is provided by Surface Mount. In total, IC powers are 8 pins on the board. 8 pins are on the supervisor. In order for this IC power to function, the supply voltage (Vsup) cannot be less than -2V. In this PMIC, the maximum supply voltage (Vsup) should not exceed 7V volts. Power management' mounting is recommended to be done with the Surface Mount type of mounting. You should set the supervisor's temperature during -40°C~85°C TA . There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. In order to maintain a stable supply current for the power management, 10μA is the recommended value. As well as this, there are other features to mention such as [0], for example. To find similar IC managements from the manufacturer, you can always search by CAT1023. The maximum supply temperature that PMIC chip can work with is 3mA.

CAT1023YI-25-GT3 Features

Simple Reset/Power-On Reset type
Minimum supply voltage of -2V
10μA operating supply current

CAT1023YI-25-GT3 Applications

There are a lot of ON Semiconductor CAT1023YI-25-GT3 Voltage Supervisors applications.

• Urban rail transit weak current power monitoring
• Consumer electronics
• Data storage applications
• Radar
• Precision measurement
• Leakage protection
• Household appliances
• Automotive power systems
• DVR
• Detection of phase imbalance