CAT1023YI-45-GT3 Overview

A total of 8 terminals are used to mount this power management. It is packaged with Tape & Reel (TR). Power management is possible to find a series of 1 functions. There are 1 channels on this power managment ic that can be found in a series. IC management is packaged as a 8-TSSOP (0.173, 4.40mm Width) package. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. Specifies a reflow peak temperature of NOT SPECIFIED for the package during reflow. The supervisor is always powered by a 3.3V volt supply. In a 1 supply voltage, the PMIC chip conducts. The mount is attached to Surface Mount. Power management has a total of 8 pins. 8 pins make up the power management. There should be a minimum voltage supply (Vsup) of -2V for this PMIC. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 7V volts. Mounting type Surface Mount is recommended. This power management is the recommended temperature range for the supervisors: -40°C~85°C TA. While in operation, this supervisor has a voltage output of Open Drain or Open Collector. In order to maintain a stable supply current for the power management, 10μA is the recommended value. As well as this, there are other features to mention such as [0], for example. It is always advisable to use CAT1023, the base supervisor number, when searching for similar PMICs from the manufacturer. The maximum supply temperature is 3mA.

CAT1023YI-45-GT3 Features

Simple Reset/Power-On Reset type
Minimum supply voltage of -2V
10μA operating supply current

CAT1023YI-45-GT3 Applications

There are a lot of ON Semiconductor CAT1023YI-45-GT3 Voltage Supervisors applications.

• Satellite navigation
• External alarm
• Automotive permanent magnet synchronous motors
• Leakage protection
• Detection of phase imbalance
• Analog circuit
• Dash board
• Efficient information transmission
• Detection of phase loss
• Embedded computing