CAT1024LI-28-G Overview

As far as the mounting terminals of this voltage supervisor are concerned, it has 8 in total. Packaged in a Tube-shape, IC management comes with a number of features. Power management is possible to find a series of 1 functions. There are 1 channels on this power managment ic that can be found in a series. Please find attached 8-DIP (0.300, 7.62mm) functions for your reference in this IC power. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. The supervisor is always powered by a 3.3V volt supply. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. Power management is included in the Through Hole mount. Taking into account all of the pins, this power management has a total of 8. Power managment ic pin count is 8. It is recommended that Vsup should not be less than 2.7V for this IC power. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. Power management recommends the Through Hole mounting type. This range of temperature should be set for the supervisors: -40°C~85°C TA. During operation, this power management system outputs Open Drain or Open Collector. It is estimated that the voltage supervisor's supply current is 3mA. Additionally, there are many other features that can be found inside of the power management, such as [0]. It is always advisable to use CAT1024, the base supervisor number, when searching for similar PMICs from the manufacturer. The maximum supply temperature is 3mA.

CAT1024LI-28-G Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 2.7V
3mA operating supply current

CAT1024LI-28-G Applications

There are a lot of ON Semiconductor CAT1024LI-28-G Voltage Supervisors applications.

• Battery cars
• Network equipment
• emergency room
• Electric heating appliances
• Display equipment
• Satellite navigation
• External alarm
• Microcontroller system
• Power distribution systems of operating room
• Utility meter