CAT1025LI-45-G Overview

As you can see, this power management is mounted through 8 terminals. Tube-packaging is used. Please refer to this PMIC for 1 functions. There are a total of 1 channels on this supervisor, and they are arranged in a series. In this PMIC, you can find 8-DIP (0.300, 7.62mm) functions for your reference. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. In a 5V supply voltage, the power management conducts. Power ics operate at 1 supply voltages. Using Through Hole, IC management is mounted. There are a total of 8 pins on power management. This power management system has 8 pins. A voltage (Vsup) that doesn't fall below 2.7V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Through Hole is the recommended mounting type. We recommend setting the supervisors to -40°C~85°C TA degrees. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. In order to maintain a stable supply current for the power management, 3mA is the recommended value. As well as this, there are other features to mention such as [0], for example. A similar IC managements number of the manufacturer can always be found by using CAT1025, the base power ics number. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 3mA.

CAT1025LI-45-G Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 2.7V
3mA operating supply current

CAT1025LI-45-G Applications

There are a lot of ON Semiconductor CAT1025LI-45-G Voltage Supervisors applications.

• Magnetic resonance imaging
• Electronics installed in the vehicle
• Electric heating appliances
• Automotive permanent magnet synchronous motors
• DC stabilized power supply module
• Set top box
• emergency room
• DSP
• Urban rail transit weak current power monitoring
• Network equipment