CAT1025WI-45-GT3 Overview

This power management consists of 8 mounting terminals on which it can be mounted. Packaged in the form of a Tape & Reel (TR), power management is easy to use. Please find attached 1 functions for your reference in this IC power. There are a total of 1 channels on this supervisor, and they are arranged in a series. In this PMIC, you can find 8-SOIC (0.154, 3.90mm Width) functions for your reference. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. The supervisor is always powered by a 5V volt supply. Power ics operate at 1 supply voltages. Surface Mount is the one that mounts power management. Power management has a total of 8 pins. Power managment ic pin count is 8. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 2.7V. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. The recommended mounting type for IC management is Surface Mount. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. During operation, this power management system outputs Open Drain or Open Collector. As far as the supply current of the power management is concerned, it is 3mA. In addition, IC management are other features such as [0], to mention only a few. For similar manage ics search of the manufacturer, you can always refer to CAT1025, the base PMIC number. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 3mA.

CAT1025WI-45-GT3 Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 2.7V
3mA operating supply current

CAT1025WI-45-GT3 Applications

There are a lot of ON Semiconductor CAT1025WI-45-GT3 Voltage Supervisors applications.

• Low voltage/high power - AI, GPU
• Fire equipment power monitoring system
• Detection of phase loss
• Power distribution systems of infant care room
• Medical-specific isolation transformer
• Set top box
• Satellite navigation
• Military communications
• Stable power system
• Transformer load monitoring equipment