CAT1026WI-30-GT3 Overview

It is mounted through 8 terminals on the power management. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. Please find attached 1 functions for your reference in this IC power. Depending on the power managment ic you are looking at, you can find a total of 2 channels. The purpose of this IC power is to provide you with a reference of 8-SOIC (0.154, 3.90mm Width) functions. It is a IC power that shares many benefits with other products from the Multi-Voltage Supervisor line. IC management conducts in a 3.3V-voltage supply. Power ics operate at 2 supply voltages. Power management is included in the Surface Mount mount. There are a total of 8 pins on power management. The pins of the power management system count 8. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 2.7V. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. Mounting type Surface Mount is recommended. The supervisors should be set to the following temperature: -40°C~85°C TA. There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. As far as the supply current of the power management is concerned, it is 10μA. Additionally, there are many other features that can be found inside of the power management, such as [0]. You can always use CAT1026, the base supervisor number, to search for similar PMICs of the manufacturer. The maximum supply temperature is 3mA.

CAT1026WI-30-GT3 Features

Multi-Voltage Supervisor type
Minimum supply voltage of 2.7V
10μA operating supply current

CAT1026WI-30-GT3 Applications

There are a lot of ON Semiconductor CAT1026WI-30-GT3 Voltage Supervisors applications.

• Detection of phase loss
• Sensitive sensors
• Detection of phase sequence
• Microcontroller system
• Dash board
• Automotive permanent magnet synchronous motors
• Precision measurement
• Urban rail transit weak current power monitoring
• Medical-specific isolation transformer
• Personal computers