CAT1026ZI-30-GT3 Overview

It is mounted through 8 terminals on the power management. There is a Tape & Reel (TR)-packaging method applied to IC management. There are 1 functions included in this PMIC so that you can refer to them. On this supervisor, there is a series of 2 channels that can be found. There are 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) functions included in this PMIC so that you can refer to them. Compared to other Multi-Voltage Supervisor products, this PMIC has a lot of benefits to offer. IC management conducts at a voltage of 3.3V. During operation, the power ic is supplied with a voltage of 2. Surface Mount mounts IC management. In total, IC powers are 8 pins on the board. Power managment ic pin count is 8. I should note that the minimum supply voltage (Vsup) for this IC management should be at least -2V, which is the minimum supply voltage that should be applied. The maximum supply voltage (Vsup) is not to exceed 7V volts in this IC management. A Surface Mount mounting type is recommended. This range of temperature should be set for the supervisors: -40°C~85°C TA. Power management has an output of Open Drain or Open Collector during operation. For this power management, there is an 10μA volt supply current. Additionally, there are many other features that can be found inside of the power management, such as [0]. It is always advisable to use CAT1026, the base supervisor number, when searching for similar PMICs from the manufacturer. The maximum supply temperature is 3mA.

CAT1026ZI-30-GT3 Features

Multi-Voltage Supervisor type
Minimum supply voltage of -2V
10μA operating supply current

CAT1026ZI-30-GT3 Applications

There are a lot of ON Semiconductor CAT1026ZI-30-GT3 Voltage Supervisors applications.

• Satellite navigation
• Stable power system
• Important electronics for automotive safety
• Military electronics
• Medical-specific isolation transformer
• Consumer electronics
• Smart meter
• Electric heating appliances
• Rechargeable batteries
• FPGA design