CAT1162LI-25-G Overview
Power management is mounted through 8 terminals. Packaged in the form of a Tube, power management is easy to use. In this PMIC, you can find 1 functions for your reference. It is possible to find on this power management a series of 1 channels. There are 8-DIP (0.300, 7.62mm) functions included in this PMIC so that you can refer to them. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. IC management conducts in a 3.3V-voltage supply. Power management conducts at a voltage of 1. The mount is attached to Through Hole. The total number of pins on this power management is 8. Pin count of the power management is 8. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 2.7V. The maximum supply voltage (Vsup) in this PMIC should not exceed 6V volts. Power management' mounting is recommended to be done with the Through Hole type of mounting. The temperature of the supervisors should be set to this range: -40°C~85°C TA. Power management has an output of Open Drain or Open Collector during operation. There is a 3mA supply current present in the power management. Additionally, IC management are a variety of features, for example [0], to name a few. A similar IC managements number of the manufacturer can always be found by using CAT1162, the base power ics number. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 3mA.
CAT1162LI-25-G Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2.7V
3mA operating supply current
CAT1162LI-25-G Applications
There are a lot of ON Semiconductor CAT1162LI-25-G Voltage Supervisors applications.
- Important electronics for automotive safety
- Low voltage/high power - AI, GPU
- Battery cars
- Automotive permanent magnet synchronous motors
- Medical-specific insulation monitor
- Power distribution systems of ICU
- Utility meter
- Data storage applications
- Embedded computing
- Leakage protection
