CAT1162WI-25-G Overview
It is mounted through 8 terminals on the power management. Power management is packaged in a Tube way. In this IC management you will find 8-SOIC (0.154, 3.90mm Width) functions for you to refer to. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. When 1 is applied to the power ic, it conducts. Power management is included in the Surface Mount mount. A IC power such as this can be classified as a EEPROMs power management system. 8 pins are present on the power management system. Supply voltage (Vsup) should be at least 2.7V for this power management. The maximum supply voltage (Vsup) in this PMIC should not exceed 6V volts. Surface Mount mounting is recommended. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. In order to maintain a stable supply current for the power management, 3mA is the recommended value. There is a requirement for 3/5V power to power this power management. At the most, voltage supervisor can work with a supply temperature of 3mA.
CAT1162WI-25-G Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2.7V
3mA operating supply current
CAT1162WI-25-G Applications
There are a lot of ON Semiconductor CAT1162WI-25-G Voltage Supervisors applications.
- Leakage protection
- Precision measurement
- Detection of phase sequence
- Display equipment
- Power distribution systems of operating room
- Functional modules
- Insulation fault location system
- Power distribution systems of ICU
- Unattended substation automation
- emergency room
