CAT1162WI-42-GT3 Overview

This voltage supervisor has a total of 8 mounting terminals that can be used for mounting. Tape & Reel (TR)-packaging is used. There are 1 functions included in this PMIC so that you can refer to them. This power managment ic consists of 1 channels, each of which can be used independently. To assist you, this PMIC includes 8-SOIC (0.154, 3.90mm Width) functions. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. In a 3.3V supply voltage, the power management conducts. A supply voltage of 1 is used to conduct the PMIC chip. Surface Mount mounts IC management. Power management has a total of 8 pins. The pins of the power management system count 8. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 2.7V. The maximum supply voltage (Vsup) in this PMIC should not exceed 6V volts. A Surface Mount mounting type is recommended. The temperature of the supervisors should be set to this range: -40°C~85°C TA. As this power managment ic operates, it is able to produce an output voltage of Open Drain or Open Collector. Supplied with a operating current of 3mA, this PMIC is capable of fully function as specified. There are also other features in the software such as [0], just to mention a few. It is always advisable to use CAT1162, the base supervisor number, when searching for similar PMICs from the manufacturer. At the most, voltage supervisor can work with a supply temperature of 3mA.

CAT1162WI-42-GT3 Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 2.7V
3mA operating supply current

CAT1162WI-42-GT3 Applications

There are a lot of ON Semiconductor CAT1162WI-42-GT3 Voltage Supervisors applications.

• Data storage applications
• Power distribution systems of operating room
• Automotive permanent magnet synchronous motors
• Leakage protection
• Leakage current detection
• Power communication system
• Precision measurement
• Kitchen appliances
• Computer applications
• Military electronics