CAT1163WI-28-T3 Overview

Power management is mounted through 8 terminals. A Tape & Reel (TR) package is used to package the power management. In this PMIC, you can find 8-SOIC (0.154, 3.90mm Width) functions for your reference. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. IC management is specified that the package peak reflow temperature should be 260. When a supply voltage of 3V is applied to the power ic, it conducts. Power management conducts at a voltage of 1. The power management is mounted by a Surface Mount-axis. Taking into account all of the pins, this power management has a total of 8. This power management has 8 pins. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 2.7V. The supply voltage (Vsup) should not exceed 6V volts in this IC power. The recommended mounting type for IC management is Surface Mount. Temperature setting for the supervisors should be -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. The supply current of the power management is 3mA. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 3mA.

CAT1163WI-28-T3 Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 2.7V
3mA operating supply current

CAT1163WI-28-T3 Applications

There are a lot of ON Semiconductor CAT1163WI-28-T3 Voltage Supervisors applications.

• Rechargeable batteries
• External alarm
• Battery-powered equipment
• Analog circuit
• Power communication system
• Dash board
• Detection of phase loss
• Urban rail transit weak current power monitoring
• Smartphones
• Medical-specific insulation monitor