CAT1232LPV-G Overview

There are 8 mounting terminals on the voltage supervisor, each of which has a different function. Packaged in a Tube-shape, IC management comes with a number of features. Power management is possible to find a series of 1 functions. Depending on the power managment ic you are looking at, you can find a total of 1 channels. In this PMIC, you can find 8-SOIC (0.154, 3.90mm Width) functions for your reference. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. The package peak reflow temperature is specified to be 250. When 5.5V is applied to the power ic, it conducts. Power management conducts at a voltage of 1. Surface Mount mounts IC management. There is a subcategory of this power ic known as Power Management Circuits. A total of 8 pins are located on this power management. This power management system has 8 pins. A voltage (Vsup) that doesn't fall below 1V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. The recommended mounting type for IC management is Surface Mount. This range of temperature should be set for the supervisors: -40°C~85°C TA. During operation, this power management system outputs Open Drain, Push-Pull. Supplied with a operating current of 50μA, this PMIC is capable of fully function as specified. There are also other features in the software such as [0], just to mention a few. For similar manage ics search of the manufacturer, you can always refer to CAT1232, the base PMIC number. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 50μA.

CAT1232LPV-G Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
50μA operating supply current

CAT1232LPV-G Applications

There are a lot of ON Semiconductor CAT1232LPV-G Voltage Supervisors applications.

• Electric heating appliances
• Military communications
• Satellite navigation
• Detection of phase loss
• Unattended substation automation
• Battery cars
• Network equipment
• Sensitive sensors
• WiFi router
• FPGA design