CAT140089TWI-GT3 Overview

A total of 8 terminals are used to mount this power management. A Tape & Reel (TR) package is used to package the power management. In this IC power you will find 1 functions for you to refer to. In this PMIC, you can find 8-SOIC (0.154, 3.90mm Width) functions for your reference. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. When 3.3V is applied to the power ic, it conducts. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. The mount is attached to Surface Mount. A IC power such as this can be classified as a EEPROMs power management system. 8 pins are present in total in this power management. Pin count of the power management is 8. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 2.5V. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. The mounting type of the supervisors is Surface MountWe recommend setting the supervisors to -40°C~85°C TA degrees. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. In order to maintain a stable supply current for the power management, 1mA is the recommended value. To find similar IC managements from the manufacturer, you can always search by CAT14008. To operate this power management, you will need at least 3/5V volts of power. At most, voltage supervisor can operate at a supply temperature of 1mA.

CAT140089TWI-GT3 Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 2.5V
1mA operating supply current

CAT140089TWI-GT3 Applications

There are a lot of ON Semiconductor CAT140089TWI-GT3 Voltage Supervisors applications.

• Power communication system
• Digitally controlled LDO regulators circuit
• Analog circuit
• Satellite navigation
• Medical-specific isolation transformer
• emergency room
• Utility meter
• DC stabilized power supply module
• Power distribution systems of infant care room
• Medical-specific insulation monitor