CAT1640LI-28-G Overview

Power management is mounted through 8 terminals. There is a Tube-packaging method applied to IC management. The purpose of this IC management is to provide you with a reference of 1 functions. There are 1 channels available on this supervisor, and each channel has a different function. In this PMIC, you can find 8-DIP (0.300, 7.62mm) functions for your reference. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. During operation, the power ic is supplied with a voltage of 3.3V. In a 1 supply voltage, the PMIC chip conducts. The mount is provided by Through Hole. 8 pins are present in total in this power management. There are 8 pins on the supervisor. There should be a minimum voltage supply (Vsup) of 3V for this PMIC. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. Through Hole mounting is recommended. The supervisors should be set to the following temperature: -40°C~85°C TA. While in operation, this supervisor has a voltage output of Open Drain or Open Collector. The supervisor's supply current is specified to 3mA. Among other features, IC power can be also taken advantage of [0], for instance. A similar IC managements number of the manufacturer can always be found by using CAT1640, the base power ics number. The power management can work with a maximum supply temperature of 3mA.

CAT1640LI-28-G Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 3V
3mA operating supply current

CAT1640LI-28-G Applications

There are a lot of ON Semiconductor CAT1640LI-28-G Voltage Supervisors applications.

• Power communication system
• Transformer load monitoring equipment
• DSP
• Radar
• Multi-voltage system
• FPGA design
• Important electronics for automotive safety
• Refrigeration
• Stable power system
• Medical-specific insulation monitor