CAT1640YI-30-GT3 Overview

There are 8 mounting terminals on the voltage supervisor, each of which has a different function. There is a Tape & Reel (TR)-packaging method applied to IC management. To assist you, this IC power includes 1 functions. Depending on the power managment ic you are looking at, you can find a total of 1 channels. There are 8-TSSOP (0.173, 4.40mm Width) functions included in this PMIC so that you can refer to them. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. The supervisor is always powered by a 3.3V volt supply. In a 1 supply voltage, the PMIC chip conducts. Surface Mount mounts IC management. In total, IC powers are 8 pins on the board. This power management system has 8 pins. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 3V, which is the minimum supply voltage that should be applied. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). Mounting type Surface Mount is recommended. The supervisors should be set to the following temperature: -40°C~85°C TA. Power management has an output of Open Drain or Open Collector during operation. Supplied with a operating current of 3mA, this PMIC is capable of fully function as specified. There are also other features in the software such as [0], just to mention a few. To find similar IC managements from the manufacturer, you can always search by CAT1640. A maximum supply temperature of 3mA can be used.

CAT1640YI-30-GT3 Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 3V
3mA operating supply current

CAT1640YI-30-GT3 Applications

There are a lot of ON Semiconductor CAT1640YI-30-GT3 Voltage Supervisors applications.

• Leakage protection
• Electric heating appliances
• Military communications
• Microprocessor system
• Automotive permanent magnet synchronous motors
• Battery cars
• Set top box
• Battery-powered equipment
• Dash board
• Unattended substation automation