There is also a SOT-23-5 Thin, TSOT-23-5 package that is used to save space on the board. LED drivers design with 1 outputs.Surface Mount is used for mounting the led light driver.With high efficiency, it emerges as a DC DC Regulator.The led light driver operates normally at -40°C~85°C TA. There are considerable benefits for Backlight.In this case, it operates with terminations of 0.Its configuration is based on 5 pins.Segments counted are 8.There is a mounting of it by Surface Mount.There is a base part number CAT4237 for this LED driver.It is acceptable to supply voltages of 5.5V volts.The output voltage of the device is 30V.There are 5 pins on this device.In addition, it can be classified as Display Drivers according to its characteristics.At its minimal input voltage, it operates at 2.8V.For highest efficiency, it works with a minimal supply voltage of 2.8V.There is 5.5V maximum value for supply current.When the supply current should be less than 1.5mA, the device will provide high efficiency.In this case, the load can only be supplied with 31.5mA current.The electronic component can fully perform its functions if the switching frequency is maintained at 1MHz.
CAT4237TD-GT3 Features
Available in the SOT-23-5 Thin, TSOT-23-5 package Operating temperature of -40°C~85°C TA Supply voltage of 3.6V Switching frequency of 1MHz
CAT4237TD-GT3 Applications
There are a lot of ON Semiconductor CAT4237TD-GT3 LED Driver ICs applications.