CAT803STBI-T3 Overview

There are 3 mounting terminals on the voltage supervisor, each of which has a different function. In terms of packaging, power management follows the Cut Tape (CT) model. In this PMIC, you can find 1 functions for your reference. There are a total of 1 channels on this supervisor, and they are arranged in a series. The purpose of this IC power is to provide you with a reference of TO-236-3, SC-59, SOT-23-3 functions. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. There is a voltage supply of 3.3V for the PMIC chip, and the chip conducts at that voltage. When 1 is applied to the power ic, it conducts. The power management is mounted by a Surface Mount-axis. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. The total number of pins on this power management is 3. 3 pins are present on the power management system. It is recommended that Vsup should not be less than 1.2V for this IC power. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. The mounting type of the supervisors is Surface MountThe temperature of the supervisors should be set to this range: -40°C~85°C TA. While in operation, this supervisor has a voltage output of Open Drain or Open Collector. As far as the supply current of the power management is concerned, it is 15μA. It is always advisable to use CAT803, the base supervisor number, when searching for similar PMICs from the manufacturer.

CAT803STBI-T3 Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
15μA operating supply current

CAT803STBI-T3 Applications

There are a lot of ON Semiconductor CAT803STBI-T3 Voltage Supervisors applications.

• Multi-voltage system
• Precision measurement
• FPGA design
• Leakage protection
• Refrigeration
• Detection of phase sequence
• Electrical fire monitoring system
• Rechargeable batteries
• Sensitive sensors
• Radio