CAT810MSDI-T3 Overview

It is mounted through 3 terminals on the power management. Packaging is in the form of a Tape & Reel (TR). In this IC power you will find 1 functions for you to refer to. Depending on the power managment ic you are looking at, you can find a total of 1 channels. The purpose of this IC power is to provide you with a reference of SC-70, SOT-323 functions. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. When 5V is applied to the power ic, it conducts. When a supply voltage of 1 is applied to the power ic, it conducts. The mount is attached to Surface Mount. There is a subcategory of this power ic known as Power Management Circuits. It has a total of 3 pins that are attached to IC management. This power management system has 3 pins. It is recommended that Vsup should not be less than 1.2V for this IC power. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. Power management' mounting is recommended to be done with the Surface Mount type of mounting. The temperature of the supervisors should be set to this range: -40°C~85°C TA. During operation, this power management system outputs Push-Pull, Totem Pole. The power management's supply current is 8μA. A similar IC managements number of the manufacturer can always be found by using CAT810, the base power ics number. To be able to work, this power management requires 5V volts of power.

CAT810MSDI-T3 Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
8μA operating supply current

CAT810MSDI-T3 Applications

There are a lot of ON Semiconductor CAT810MSDI-T3 Voltage Supervisors applications.

• Power distribution systems of CCU
• Insulation fault location system
• Analog circuit
• Personal computers
• Precision measurement
• Radar
• Data storage applications
• Military communications
• Digitally controlled LDO regulators circuit
• Refrigeration