CAT810STBI-T3 Overview

There are 3 terminals on this power management that allow it to be mounted. A Cut Tape (CT) package is used to package the power management. Please find attached 1 functions for your reference in this IC power. A series of 1 channels can be found on this supervisor. The purpose of this IC power is to provide you with a reference of TO-236-3, SC-59, SOT-23-3 functions. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. During operation, the power ic is supplied with a voltage of 3.3V. Power ics operate at 1 supply voltages. The power management is mounted by Surface Mount. It is possible to subcategorize this power ic as a Power Management Circuits chip. In total, it has 3 pins on IC management. The pins of the power management system count 3. It is recommended that Vsup should not be less than 1.2V for this IC power. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. Surface Mount is the recommended mounting type. We recommend setting the supervisors to -40°C~85°C TA degrees. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. There is a 6μA supply current present in the power management. For similar manage ics search of the manufacturer, you can always refer to CAT810, the base PMIC number.

CAT810STBI-T3 Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
6μA operating supply current

CAT810STBI-T3 Applications

There are a lot of ON Semiconductor CAT810STBI-T3 Voltage Supervisors applications.

• Power distribution systems of CCU
• Telecommunications equipment
• Medical-specific isolation transformer
• emergency room
• Urban rail transit weak current power monitoring
• Battery cars
• Dash board
• Refrigeration
• WiFi router
• Network equipment