CAT823ZSDI-GT3 Overview

There are 5 mounting terminals on the voltage supervisor, each of which has a different function. A Tape & Reel (TR) package is used to package the power management. There are 1 functions included in this PMIC so that you can refer to them. Depending on the power managment ic you are looking at, you can find a total of 1 channels. In this IC management you will find 5-TSSOP, SC-70-5, SOT-353 functions for you to refer to. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. The package peak reflow temperature is specified to be 260. When 2.5V is applied to the power ic, it conducts. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. Surface Mount mounts power management on the wall. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. The total number of pins on this power management is 5. 5 pins are on the supervisor. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.2V. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. The recommended mounting type is Surface Mount. The supervisors should be set to the following temperature: -40°C~85°C TA. During operation, this power management system outputs Push-Pull, Totem Pole. The supervisor's supply current is specified to 4mA. Additionally, there are many other features that can be found inside of the power management, such as [0]. To find similar IC managements from the manufacturer, you can always search by CAT823.

CAT823ZSDI-GT3 Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
4mA operating supply current

CAT823ZSDI-GT3 Applications

There are a lot of ON Semiconductor CAT823ZSDI-GT3 Voltage Supervisors applications.

• Set top box
• Consumer electronics
• DSP
• Power distribution systems of infant care room
• emergency room
• Microprocessor system
• Analog circuit
• Leakage protection
• External alarm
• Automotive power systems