ALSO AVAILABLE 1.8-5.5V WITH 2MHZ FOR -40 TO 85 DEG CEL
Technology
CMOS
Voltage - Supply
1.8V~5.5V
Terminal Position
DUAL
Number of Functions
1
Supply Voltage
5V
Terminal Pitch
1.27mm
Base Part Number
CAT93C46
Pin Count
8
JESD-30 Code
R-PDSO-G8
Qualification Status
Not Qualified
Supply Voltage-Max (Vsup)
5.5V
Power Supplies
2/5V
Supply Voltage-Min (Vsup)
1.8V
Memory Size
1Kb 128 x 8 64 x 16
Memory Type
Non-Volatile
Operating Mode
SYNCHRONOUS
Clock Frequency
4MHz
Supply Current-Max
0.001mA
Memory Format
EEPROM
Memory Interface
SPI
Organization
64X16
Memory Width
16
Write Cycle Time - Word, Page
5ms
Standby Current-Max
0.000001A
Memory Density
1024 bit
Parallel/Serial
SERIAL
Serial Bus Type
MICROWIRE
Endurance
1000000 Write/Erase Cycles
Data Retention Time-Min
100
Write Protection
SOFTWARE
Alternate Memory Width
8
Height Seated (Max)
2.03mm
Length
5.255mm
Width
5.23mm
RoHS Status
RoHS Compliant
CAT93C46BXI-T2 Product Details
CAT93C46BXI-T2 Overview
There is a Non-Volatile memory type associated with this device. Case Tape & Reel (TR) is available. Embedded in the 8-SOIC (0.209, 5.30mm Width) case, memory ics is a single file. It is estimated that the memory size on the chip is 1Kb 128 x 8 64 x 16. There is a EEPROM-format memory used in this device, which is the memory format used by mainstream devices. A wide operating temperature range makes this device ideal for a variety of demanding applications. A supply voltage of 1.8V~5.5V can be applied to it. It is recommended that the mounting type be Surface Mount. There are 8 terminations on the chip. This part supports as many as 1 functions for the comprehensive working procedure. In order to power this memory device, 5V will be necessary. The memory has a clock frequency rotation within 4MHz. In order to select similar parts, typical manufacturers refer to CAT93C46 as the device's base part number. It has 8 pins indicating it has 8 memory locations. Despite all its merits, this chip also features ALSO AVAILABLE 1.8-5.5V WITH 2MHZ FOR -40 TO 85 DEG CEL to boost system performance. This memory chip requires a mere 2/5V of power. The MICROWIRE type serial bus this memory integrates with is helpful to carry and transfer data to the CPU. As far as the supply current is concerned, it can be operated with a maximum of 0.001mA of current
CAT93C46BXI-T2 Features
Package / Case: 8-SOIC (0.209, 5.30mm Width) Additional Feature:ALSO AVAILABLE 1.8-5.5V WITH 2MHZ FOR -40 TO 85 DEG CEL
CAT93C46BXI-T2 Applications
There are a lot of ON Semiconductor CAT93C46BXI-T2 Memory applications.