CS51021AEDR16G Overview

Capsuled in the 16-SOIC (0.154, 3.90mm Width) package, the switching controller can be used for a wide range of applications. There is enough capacity in the dc motor controller to generate the output for the 1 input. Packaged in solid enclosures, this pmic has a Tape & Reel (TR) rating. With Transistor Driver dc switching's output (s), it is able to handle it. The supply and operating voltage of the dc control are 7.7V~20V. A -40°C~85°C TA dc switcher is not a problem. dc dc regulators can be carried out with Surface Mount. The dcdc regulator features Current Limit, Soft Start for efficient switching control. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. The switching converters's terminals (s) are designed at DUAL. A variety of dc switching's functions can be performed on 16 terminations. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 14V is input. A search for "CS51021A" will reveal other relevant dc to dc converter ics. 16 pins are present on switching converter. In particular, switching converter is a type of Switching Regulator or Controllers. If you are starting a new project, you should note the dc dc regulator's typical output current is 150mA. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 83 % during power-up and power-down. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher'sA frequency of 1MHz is set for the switching controller. For nominal working status, the input voltage can be set as 20V. Components may become damaged if their current exceeds 9mA.

CS51021AEDR16G Features

Transistor Driver Outputs
Current Limit, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 83 %
Frequency: 1MHz

CS51021AEDR16G Applications

There are a lot of ON Semiconductor CS51021AEDR16G DC to DC converter applications.

• Computer monitoring equipment of building
• Mobile phones
• Grinders
• Special machining machine tools
• Balance equipment
• Cutting machine tools
• Refrigerators of central air conditioners
• Electrical distribution systems
• Gear/thread machining machines
• Flaw detection equipment