DM74ALS174M Overview

It is embeded in 16-SOIC (0.154, 3.90mm Width) case. You can find it in the Tubepackage. The output it is configured with uses Non-Inverted. The trigger it is configured with uses Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. It operates with a supply voltage of 4.5V~5.5V. It is operating at a temperature of 0°C~70°C TA. Logic flip flops of this type are classified as D-Type. In FPGA terms, D flip flop is a type of 74ALSseries FPGA. There should be no greater frequency than 50MHzon its output. In total, it contains 1 elements. It consumes 19mA of quiescent current without being affected by external factors. Members of the 74ALS174family make up this object. In this case, the electronic component is mounted in the way of Surface Mount. The 16pins are designed into the board. In this device, the clock edge trigger type is Positive Edge. The flip flop is designed with 6bits. In order to achieve its superior flexibility, 7 circuits are used. In order to achieve high efficiency, the supply voltage should be maintained at 5V. There are 2 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. Currently, there are 3 input lines present. High level output current is set to -400μA. In the low level output current setting, 8mAis used. Ideally, the operating temperature should be below 70°C. Operating temperatures should be above 0°C. Normally, it operates with a voltage of 4.5VV as its minimum supply voltage. There is a maximum voltage support of 5.5V. This can be achieved at a frequency of 50MHz.

DM74ALS174M Features

Tube package
74ALS series
16 pins
6 Bits

DM74ALS174M Applications

There are a lot of ON Semiconductor DM74ALS174M Flip Flops applications.

• Synchronous counter
• Data storage
• Storage registers
• Modulo – n – counter
• Automotive
• Digital electronics systems
• QML qualified product
• Matched Rise and Fall
• Counters
• Latch