DM74ALS563AWM Overview

In the 20-SOIC (0.295, 7.50mm Width) package, it can be found as an embedded module. A package of Tube has been used. It is configured with an output of Tri-State. D-Type Transparent Latch is the logic type of this electrical device. The way in which this electronic part is mounted is Surface Mount. A voltage of 4.5V~5.5V is used as the supply voltage for this device. It operates at 0°C~70°C degrees Celsius. It is a type of FPGA belonging to the 74ALS series. Electronic parts with 8 bits are designed for this application. It belongs to 74ALS563 family. It is designed with 20 pins. Surface Mount is used to mount this electronic part. There are 8 input lines in which electronic circuits are present. If you want to achieve high efficiency, make sure the supply voltage is at 5V. There are 3 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. The quiescent current consumed by it is 16mA because it is unaffected by external factors. The element count is 1. 8 circuits are used to achieve superior flexibility. It has been set to 2.6mA for the low level output current. -2.6mA represents the high level output current. Lower than 70°C is the ideal operating temperature. A temperature greater than 0°C should be used for operation. 5.5V is the maximum voltage it supports. With a voltage of 4.5V, it operates at its minimum capacity.

DM74ALS563AWM Features

20-SOIC (0.295, 7.50mm Width) package
74ALS series
8 Bits
74ALS563 family
20 pins
1 elements

DM74ALS563AWM Applications

There are a lot of ON Semiconductor DM74ALS563AWM Latches applications.

• Up-Down Johnson
• Hammer
• Watches
• Communication systems
• Counter timers
• Avionics
• Parallel Input
• Relay replacement
• Counting
• Accumulator Registers