DM74ALS573BN Overview

There is an embedded version of it in package 20-DIP (0.300, 7.62mm). Packaged in the way of Tube. Tri-State is the output configured for it. This electrical device has the logic type D-Type Transparent Latch. Mounting this electronic component follows the Through Hole method. The voltage supply is 4.5V~5.5V. It operates at 0°C~70°C degrees Celsius. The 74ALS series of FPGAs is the one this FPGA belongs to. It is designed with 8 bits. 74ALS573 is its family. The pin configuration of the device is 20. It is mounted according to the Through Hole method. There are electronic circuits attached to the 8 input lines. With 24mA, maximum design flexibility is ensured. In order to achieve high efficiency, the supply voltage should be kept at 5V. It follows that 3 output lines are generated from the binary equivalent of the input line. It consists of 1 elements. The superior flexibility of this circuit can be attributed to the use of 8 circuits. It is set to zero for the low level output current. It is set to zero for the high level output current. It is recommended that the operating temperature not exceed 70°C. The operating temperature should be higher than 0°C. Voltages up to 5.5V can be supplied. This device requires a minimum voltage of 4.5V.

DM74ALS573BN Features

20-DIP (0.300, 7.62mm) package
74ALS series
8 Bits
74ALS573 family
20 pins
1 elements

DM74ALS573BN Applications

There are a lot of ON Semiconductor DM74ALS573BN Latches applications.

• Timers
• Buffer/Storage Registers
• General-Purpose Register
• Avionics
• Multistage ripple counting
• Lamp and Display (LED)
• Parallel data synchronization
• Automatic test equipment
• Shift right with parallel loading
• Data acquisition