DM74AS373WMX Overview

The 20-SOIC (0.295, 7.50mm Width) package contains it. Tape & Reel (TR) is the way in which it is packaged. In this configuration, the output is set to Tri-State. D-Type Transparent Latch is the logic type of this electrical device. Electronic parts are mounted in accordance with Surface Mount. A 4.5V~5.5V supply voltage is required to operate it. There is a temperature of 0°C~70°C at which the system operates. In the 74AS series, this FPGA is located. The design of this electronic part is based on 8 bits. The family in which it belongs to is 74AS373. The 20 pins are designed into it. Surface Mount is the method used for mounting this electronic part. Input Lines consist of electronic circuits, and there are 8. If you want to achieve high efficiency, make sure the supply voltage is at 5V. 3 output lines generate the binary equivalent of the input lines. A total of 1 elements make up this object. The circuit's superior flexibility is achieved through the use of 8 circuits. There is 15mA low level output current set. -15mA represents the high level output current. There should be a temperature below 70°C at which the system is operating. The operating temperature should be higher than 0°C. There is a maximum voltage supply of 5.5V that can be applied to it. This device requires a minimum voltage of 4.5V.

DM74AS373WMX Features

20-SOIC (0.295, 7.50mm Width) package
74AS series
8 Bits
74AS373 family
20 pins
1 elements

DM74AS373WMX Applications

There are a lot of ON Semiconductor DM74AS373WMX Latches applications.

• Up/down difference counting
• OC-48 communication systems
• Motor Drives
• Accumulator Registers
• Counting
• Relay
• Control circuits
• Stacked or Push-Down Registers
• Instrumentation
• General-Purpose Register