Driver - Fully Integrated, Control and Power Stage
Number of Outputs
1
Output Voltage
2V
Operating Supply Voltage
3.3V
Supply Voltage-Max (Vsup)
4.3V
Supply Voltage-Min (Vsup)
2.5V
Interface
I2C
Analog IC - Other Type
BRUSH DC MOTOR CONTROLLER
Operating Supply Current
77mA
Output Configuration
Differential
Current - Output
200mA
Logic Function
AND
Voltage - Load
1.95V
Motor Type - AC, DC
LRA
Height Seated (Max)
0.55mm
RoHS Status
ROHS3 Compliant
FAH4840L8X Product Details
FAH4840L8X Overview
The package is designed with [0].The part is packaged in a 8-UFQFN case.In general, it is recommended that the part be mounted by Surface Mount.The component connected in Haptic Feedbackis compatible with it.2.5V~4.3V volts can be supplied by the device.Drivers controllers operates wDrivers controllershin a range of -40°C~150°C TJdegrees Celsius.There is a motor type LRAavailable.This part has 8termination options.A voltage of 1.95Vcan be applied to the load.This amplifier should be operated at 3.3V.Ideally, it should be mounted in the Surface Mountposition.Maintain a current of 200mAfor the part output.A BRUSH DC MOTOR CONTROLLERanalog integrated circuit is used in the device.Based on the FAH4840part number, it is found.The device has 8 pins.Drivers controllers is possible to access 1outputs.A supply voltage of 3.3Vis required to operate this driver.2Vis maintained as the output voltage.Controller ic operates on a supply current of 77mA.
FAH4840L8X Features
Applications : Haptic Feedback Load voltage across the chip 1.95V base on FAH4840 number designed with 1 outputs
FAH4840L8X Applications
There are a lot of ON Semiconductor FAH4840L8X motor drivers applications.