FAN5702UC30X Overview

To save space on the board, it has a 16-UFBGA, WLCSP package. A LED driver using this design has 6 outputs.In order to mount the led light driver, Surface Mount is used.This emerges as a DC DC Regulator with high efficiency and reliability.If the led driver ic is set to -40°C~85°C TA, it will work normally.Backlight benefits significantly from the program.A frequency of 1.2MHz is used to operate it.A termination of 16 is used to operate the LED driver.This configuration is built upon 16 pins.The number of segments is 6.It is mounted in the way of Surface Mount.There is a base part number FAN5702 for this LED driver.It is acceptable for the voltage to be 5.5V.Moreover, it can be classified as Display Drivers due to its characteristics.The minimal input voltage is 2.7V.The maximum efficiency standards can be met by operating at the minimal voltage of 2.7V during operation.In the event that the maximum supply current is allowed, it reaches 5V.With a minimum supply current less than 4.4mA, this device achieves high efficiency.There is no current available to supply to the load.There is 4V output voltage on this device.It is recommended that the output voltage be no higher than 5V.

FAN5702UC30X Features

Available in the 16-UFBGA, WLCSP package
Operating temperature of -40°C~85°C TA
Frequency of 1.2MHz
Supply voltage of 3.6V
Output voltage of 4V

FAN5702UC30X Applications

There are a lot of ON Semiconductor FAN5702UC30X LED Driver ICs applications.

• LED Lighting PFCs, Linear Dimmable
• Panel lighting
• Refrigeration lighting
• LED backlight driver for LCD displays for Tablets and Note PCs
• General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
• Power source for accessories such as car audios, car navigation systems, and ETC systems
• Medical surgery lighting
• Gallery lighting
• Auxiliary lights for on-vehicle cameras
• Down lighting