FHP3131IS6X Overview
In the package, you will find a SOT-23-6-case to contain the op amp ic. Buffer amps of this type are called Voltage Feedback-types. A Tape & Reel (TR) case is used for delivering the op amp. 6 pins are available on the instrumentation amplifier. With regard to input offset voltage, instrumentation amplifier is rated at 5mV. This electronic part is recommended for mounting type Surface Mount. According to the manufacturer, this buffer op amp works well at -40°C~85°C , which is a good operating temperature. You can run this op amp ic on 400μA . There should be no change in the voltage gain. This op amp ic has 1 circuits. The op amp ic has 1 channels on it. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. This instrumentation amplifier cannot operate below -40°C degrees Celsius. Instrumentation amplifier should only be used at temperatures up to 85°C. Op amp has total of 1 elements. It is recommended that you use an 400μA power supply with this electrical part in order for it to operate correctly. Regarding the voltage of the supply, this electrical part can work from a voltage as low as 12V, and this is an excellent feature. Keeping the linear amplifier's supply voltage above 2.5V is recommended. As a general rule, you should conduct this electronic component under dual supply voltages of 6V volts. On the linear amplifier, there are 1 amplifiers.
FHP3131IS6X Features
100dB voltage gain
Output Type: Rail-to-Rail
FHP3131IS6X Applications
There are a lot of ON Semiconductor FHP3131IS6X Instrumentational OP Amps applications.
- Portable media players
- ECG equipment
- Power generator
- Laptop
- Logarithmic operation circuits
- Proportional counter tubes
- E-book readers
- Switching amplifier
- Information processing
- Large motor controllers
